Products > Acupuncture & Moxibustion Supplies > Point Detectors, Detectors with Stimulation & Acupuncture Stimulators



ED3930
AWQ-105 PRO ACUPUNCTURE STIMULATOR

Q.O.R.


-
AWQ-105 PRO ACUPUNCTURE STIMULATOR
is a professional, brand new unit with 5 channels. It comes up with a modern design and inherits the features of AWQ-series acupunctoscope. This professional unit provides multiple functions and features, which are essential in daily acupuncture practice.

Features & Advantages:
  • 5 outputs (including an output exclusively for the use of search/stimulation probe for point detection and immediate stimulation.)
  • Frequency and Pulse Width are adjustable & separated into two groups, Group 1 for Ch 1 & 2 , and Group 2 for Ch 3 & 4. (Instead of one Frequency and one Pulse Width for all channels)
  • 2 large LCD (each measures 15X30 mm) for displaying precise frequency of each group, and one LCD (15x30 mm) for showing sensitivity during acup-point detection. This LCD also displays the frequency (fixed at 10 Hz) during direct stimulation by the search/stimulation probe.
  • 3 different Mode; Cont (continuous), Modulate and Burst.
  • High & Low selection of output. X1 and X5 (multiplier) of pulse rate and width adjustments.
  • Timer selection for different period of treatment session. Continuous, 15 minutes and 30 minutes.
  • Buzzer ON/OFF, for sound control during point detection.
  • Steady output intensity increment control, no cross over, and no interference between each output.
  • Music for timer alert and error warning.

    Technical specifications:
    Output channel : 5 Channels (including one channel for “APD/STIM”)
    . Normal Output channels APD/STIM output channel
    Output Voltage Hi : 0 - 22.5V
    Low : 0 - 10V
    0 - 40 V
    Output Current Hi : 0 - 45 mA
    Low : 0 - 20 mA
    0 - 80 mA
    Pulse width X1 : 50 - 500 μS adj.
    X5 : 10 - 100 μS adj.
    260 μS (fixed)
    Pulse Rate X1 : 1 - 100 Hz. Adj.
    X5 : 5 - 500 Hz. Adj.
    10 Hz (fixed)


    APD & Stim mode : LED lights up in “Stim” mode, and is flashing when “Stim button” is pressed.
    Waveform : Biphasic Square Wave with a negative spike
    Pulse width : 50 -500 μS adjustable, when in X1 position
    10 -100 μS adjustable, when in X5 position
    Pulse Rate : 1-100 Hz, adjustable, when in X1 position
    5-500 Hz, adjustable, when in X5 position
    Mode : Constant - pulse rate and width are adjustable from 1-100 Hz, & 50-500 μS respectively at X1 position, and from 5-500 Hz, & 10-100 μS respectively at X5 position,
    Modulation - Preset Pulse Rate and width ramp up and down for 6 seconds per one cycle
    Burst - Preset Pulse Rate and width 3 seconds; 3 seconds
    Timer : Cont ; 15 min; 30 min
    Display : 3 LCD, each measure 15x30 mm
    Low battery lamp : The LED lights when voltage drops to 7V
    Power supply : C Size batteries x 6 pcs
    Or DC 9V adaptor (optional)
    DC Power Jack : 6.3mm x 2mm centre pin.
    Output socket : 1.5mm diameter socket.
    Error LED : Red LED lights up & buzzer sounds when turn ON the unit without reset all previous channels setting to zero output. The unit resumes work after reset all channels to zero position.

    Contents and Accessories:

    AWQ-105 PRO unit 1 pc.
    Search / Stimulation Probe 1 pc.
    Connecting wires (4 colors) 4 pcs.
    Pin lead to alligator clip adaptor 4 prs.
    DC 1.5V C size battery 4 pcs.
    Instruction manual 1 pc.






  • Copyright 2014. Mayfair Medical Supplies Ltd. All Rights Reserved.